Electro Fieldmeter EFM 022 Description：

The electro fieldmeter EFM 022 is very user friendly due to its compact design and one touch operating. The antistatic plastic housing is EPA- compatible.

Menu driven selection of measurement distance

Voltage potentials can be directly measured for preselected measurement distances, thus would avoid recalculation. 5 measurement distances are available, which makes it even possible for your most convenient handling in problematic areas.

Hold function

With the hold function the measured value can be frozen in the display, so that accurate measurements can be made even in places that are difficult to access.

Charge Plate - function

Mount the plate electrodes on top of the EFM 022. Than charge the plate with the HV-Converter higher ±1.100V. By discharging the plate an internal timer starts at ±1.000V and stops at ±100V. The positive / negative discharge time will be shown at the display.

E-Field Meter Ranges:

manual selected.
± 20kV/m; ± 200kV/m und ± 1MV/m

Max. Value:

Distance 1cm is switched on (for MK 023)
After pressing the switch the maximum pos. and neg. Measure Values are displayed (Walking Test). By pressing the switch again the values will be reset and starts again.

No zero drift

Therefore a zero adjustment is not needed before each measurement.

Measurement ranges:

distance 1cm: 0 to 10kV

distance 2cm: 0 to 20kV

distance 5cm: 0 to 50kV

distance 10cm: 0 to 100kV

distance 20cm: 0 to 200kV

Scope of delivery:

soft bag

9V Alkaline battery

grounding cable 1,5m

2 distance supports (2cm)

manual

certificate of calibration

Specifications